Skip to main content

This is how to clean a grill, whether it’s charcoal, gas, or pellet

Grilling season is upon us. Here's how to clean yours properly before that first cookout of the year

Can you smell that? It's not just the flowers of spring, it's a waft of burgers and veggies, cooking on the grill. Yes, grilling season is finally here and it's time to make sure your favorite outdoor cooking station is clean and ready to go.

It's not the most fun task, but it's one very much worth doing. And when you're done, you can reward yourself with a great grill or smoker recipe and a refreshing spring cocktail. It's the best way to kick of the al fresco dining season.

Difficulty

Moderate

Duration

45 minutes

What You Need

  • Disposable latex or nitrile gloves

  • Paper towels

  • Sturdy grill brush

  • Putty knife

  • Scrub brush (stiff nonmetal bristles)

  • Grill cleaner (dish soap and water also work)

  • Vegetable oil spray (or a 1/2 cup of vegetable oil)

  • Shop vacuum

Fortunately, cleaning a grill doesn't require much aside from some effort. You likely already have all of the tools and even if you don't have the exact agent, you can whip up one that's just about as good at home (aka dish soap in lieu of grill cleaner). Read on to get your grill sparkling just in time for dinner outside.

A dirty grill grate ready for cleaning
Image used with permission by copyright holder

How to clean a grill to keep it in tiptop shape

Whether you are storing your grill for the offseason (which we don't believe in) or you are just maintaining it during the warmer months, you need to follow these steps to keep your grill from rusting — or worse, picking up unwanted bacteria.

Step 1: Remove your grill grate.

The grill grate is one of the most important components to keep clean. Removing it allows you to access the grill's other internal components. Don't forget to put on disposable gloves before you start cleaning. They're far easier to remove than grease stuck on your hands.

A gas grills internal components removed for cleaning.
A gas grills internal deflectors removed for cleaning Image used with permission by copyright holder

Step 2: Remove any internal grill components.

Almost all grills have some kind of internal components that need to be removed and cleaned:

  • Gas grills will often have flame diffusers that sit above the burners.
  • Pellet grills will often have two heat deflectors that sit perpendicular to each other over the firepot.
  • Kamado grills will have an internal fire pot and fire ring you can remove.
  • Charcoal grills will have a lower charcoal grate that charcoal sits on.
A person removes grill grates.
Chris DeGraw/Digital Trends

Step 3: Start cleaning the inside of your grill.

With your internal components removed, use a putty knife or a sturdy spatula to break free any carbonized bits that may be caked on. These bits along with any ash or fallen pieces of metal should be removed and discarded.

A shop vacuum makes easy work of this task but you can also use a stiff brush. Most grills have some kind of an ash or grease collection area that can also be removed and cleaned.

Although it should go without saying if you're cleaning a charcoal grill, make sure all of the embers are completely extinguished before removing.

Step 4: Inspect your components.

With the grill pulled apart, now's a good time to do a grill inspection.

If you have a gas grill, inspect the burners and make sure they are still intact. You can use a stiff brush to clean the burners from any cobwebs or other unauthorized stowaways that could clog the burners. Kamado grills should have their bands that connect the dome to the main part of the grill inspected and tightened.

Pellet grills should have a firebox that is free from small holes, and you should check to see that your pellet auger is turning freely during operation. Any loud knocking may indicate there is a blockage somewhere between the pellet hopper and the fire pit. Depending on how humid your climate is, you may even want to consider removing any old pellets and replacing them with new ones.

Charcoal grills — especially freestanding ones — should be inspected to make sure that the legs and wheels are in good condition. There's nothing worse or more dangerous than a charcoal grill's stand failing and falling over while you're cooking.

A dirty grill that needs to be sprayed with a cleaner.
Image used with permission by copyright holder

Step 5: Clean your grill grates.

Cleaning your grill grates is something that should be done on a regular basis if not every time you cook. Scrape as much cooked-on food and grill grit away as you can with a putty knife, firm spatula, or grill brush. If that doesn't do the trick, soak it in hot water and a degreasing kitchen soap like Dawn for a bit. Then give the grill grate a good scrub.

There are all kinds of cleaning products ranging from all-natural to chemical and caustic made for cleaning grills. The one you choose depends on personal preference and how big of a mess you're cleaning. Regardless of how you decide to clean your grill grate, it's not advisable to put them in the dishwasher.

Step 6: Oil your grill grate and components.

Some grill grates and internal components are made from stainless steel, which can oxidize after cleaning. It's a good idea to lightly coat oil onto your grill grate and any removable heat deflectors or components to help protect them from rusting. Less is more when it comes to oiling, and you want to remove any pooling or droplets of oil as best as possible before reassembling your grill.

Many grills will have an enamel coating on the grill grates. If this is the case, you should not need to apply oil.

A red burner grill sits next to a pool.
Image used with permission by copyright holder

Step 7: Put the grill back together.

Now that the internal grill components and grill grate have been cleaned it's time to put the grill back together. Take care to make sure everything fits back the way it should. But keep in mind that the grill's high heat can sometimes cause the metal to warp a bit.

A little extra effort now in making sure everything fits and is seated properly will make for a more efficient cooking experience.

A steak is grilled over flames on a grill.
Paul Sidoriak @GrillingMontana

Step 8: Fire your grill back up.

Now that the grill is back together it's time to breathe some life into it. I like to fire up gas and pellet grills immediately after cleaning. This serves two purposes: It allows any moisture to burn off and evaporate, and it will burn off the oils and season your grill grate and the oiled components.

Bring the grill up to about 450 degrees Fahrenheit and allow it to burn at that temperature for 30 minutes. This should burn off any oils and assist with seasoning the metal components.

A few additional tips to take away. First, it's typically easier to clean warm surfaces, so consider heating them up first before cleaning. Make sure your brush and other cleaning supplies aren't too grubby and consider replacing them in between every deep clean. Lastly, avoid mold buildup in the offseason by cleaning and drying it out before the end of the grilling season. Otherwise, you may take on moisture and any food buildup inside could manifest into something quite gross during the offseason.

In most cases, you can effectively clean and burn back in your grill in under an hour. A little bit of grill maintenance today will not only make your grilled food more delicious but it will help to make your grill last longer. The only thing left to do is figure out what you plan on grilling next.

Editors' Recommendations

Mark Stock
Mark Stock is a writer from Portland, Oregon. He fell into wine during the Recession and has been fixated on the stuff since…
How to grill filet mignon on a gas grill: Advice from an expert
Time to pull out the grill and grab your favorite cut of meat
Grill barbecue gourmet filet entrecote steaks at summer party

The weather is changing, and your grill beckons. Longer, warmer days beg for full propane tanks and your favorite meats and vegetables thrown atop the flame.

One of the most iconic cuts within the wide world of animal protein is filet mignon. This delicate steak is prized for both its texture and its scarcity. Simply put, there's just not much of it per cow. The tender cut is pulled from the smaller front end of the tenderloin, around the animal's upper midsection. It tends to show up as a round cut, which makes sense as it runs around the cow's spine.
Grilling filet mignon

Read more
How to make a buttery hollandaise sauce like a professional chef
Here's everything you need to know about this mother sauce
Eggs Benedict from Hash Kitchen

As Chef Joey Maggiore of the Arizona Brunch restaurant chain Hash Kitchen said, "Perfecting hollandaise is not necessarily the hardest, but it is a less forgiving sauce. You must pay attention to detail when making hollandaise so that you get the consistency and taste you need for the perfect sauce." Chef Maggiore couldn't be more spot on. Hollandaise is one of the five mother sauces, meaning, it's the base sauce for other, more complex sauces like béarnaise, choron, and maltaise sauces.

Before the technological age of blenders, the old-school method of making the perfect hollandaise sauce took some practice. But now, with technology, there are more foolproof ways to make the mother sauce. We'll cover all those methods, plus give you some of Chef Maggiore's tips and tricks on how to make hollandaise sauce. Also, stick around until the end for an easy hollandaise sauce recipe.
Hollandaise sauce ingredients

Read more
The complete guide to cleaning a fish for beginners
A step-by-step guide to handling your next fishing trip haul
Hands holding trout

Sporting your best fishing gear and you just landed a big catch? Nice work! A tasty, fresh fish fillet is just a few slices away. Whether you’re planning to cook the whole fish, steak it, or fillet it, you must learn how to clean your catch. Follow this guide to learn how to clean a fish you just caught fresh.
How long can you keep fresh fish before cleaning it?

Now that you have some freshly caught fish, how long can you keep it whole before it needs to be cleaned? Fish, after all, has incredible health benefits; ideally, you want to clean the whole fish as soon as possible to preserve the best flavor. However, if time or other constraints are an issue for you, you can keep whole fish uncleaned on ice or refrigerated for a day or two at the max. Any longer, and you risk losing precious flavor and texture and risk spoilage.
Preparing to clean a fish

Read more