If you find yourself in the wilderness as a means of getting away from people and experiencing some true social distancing, you might find the need to build a fire. And to build a fire, what do you need? (Everybody together now) GASOLINE! Kidding, you need wood. Not just any wood, though, you need wood that is the right. size for burning, otherwise you’re fire is either going to go out too soon or not light at all. So let’s assume you have a stack of logs or some fallen trees around you — what do you do? You have to cut it.
Learning how to split wood — with or without an axe — will help you build roaring fires for years to come.
How to Split Wood With an Axe
- Chopping Block
- Safety Glasses
If you want to chop wood properly, you should have, at the very least, a good, heavy axe (though you can get by with a good hatchet in some cases). To be more accurate, you should have a maul, the type of axe with one sharp edge set into a thick, heavy head. The maul’s shape concentrates maximum force into the blade and helps split logs apart as it is driven down into the wood.
Better still, you will have a maul, a wedge, and a sledgehammer. Many logs will fly apart with one single, satisfying strike of the maul, but larger and/or harder (and damper) logs might require the use of a wedge and sledge combination.
You should have a decent chopping block, which is usually just a large, squat log, but is ideally a tree stump. Also consider gloves, boots, safety glasses (or any glasses, really), and a damn fine pair of jeans. There you have it, men — the tools of the trade.
Contrary to popular misconception, the best stance for splitting wood sees your shoulders squared off relative to the doomed log, not with one foot forward and one a step back. This position concentrates maximum force down through your swing.
Put your dominant hand right under the head of axe; it will slide down as you swing, directing the blade (or the sledgehammer) and increasing force as you move. Your other hand should grip the axe handle right near its bottom. Swing for the center of smaller logs (hit with the grain when possible) and cut nearer the outside of larger logs, with the blade striking parallel to an imagined diameter (not perpendicular to the arc of the log, if you follow).
If your maul gets stuck, you can either pull it out and try again; you can drive in a wedge and knock that through with the sledgehammer; or you can leave the maul in the log, turn the whole thing over, and pound away at it with a hammer (or with another log, if you are sans sledge).
With a maul, a wedge, a sledgehammer, and some persistence, you should be able to split most logs that are less than two feet in length and two feet in diameter. Above that size, consider using an electric log splitter or hiring a Norwegian man with an impossibly gorgeous beard to help.
How to Split Wood Without an Axe
Now … what to do if there’s wood to be split, but you don’t have those tools on hand? To split wood without an axe, one labor-intensive but effective approach is to saw through logs lengthwise. But we’re going to go ahead and assume you don’t have a saw. Got a knife every man should own, at least? Good.
For slimmer logs, you can often split wood using a knife with a fixed blade. Saw or score a notch in the top of the wood (ideally using a saw — even a small one as found in a Swiss Army Knife will help make a decent starting crevice), then tap the blade into the wood using a hammer. Make sure you use a section of the knife blade that’s near the handle, as it will be thicker and stronger at this point. Once you have the knife tapped firmly into the wood, you can commence with heavier blows (use a standard hammer or another chunk of wood), alternating on the back of the exposed blade and the handle, slowly working the blade down through the wood.
To split larger pieces of log without an axe or a proper wedge, you will need to carve a series of wedges out of slender staves. You will essentially be making a series of small, simple spears. Use a knife or a very sharp rock to create a crevice in the wood to be split, then commence tapping your wooden wedge points into the log. Plan to place the first wooden wedge near the edge of the log and to tap it in a bit, then place another next to it, and so forth. Eventually, you should have multiple wedges embedded in the log that you can work on in an alternating fashion. The process is painstaking, but it works.
There are a few other tricks you might try to make your log-splitting go a lot quicker. For example, you could place an old tire on your splitting block, set the wood round inside the tire or wrap a bungee cord around the base of the log; then get to swinging as you normally would. This will keep your wood in one place while you’re splitting it so you don’t have to worry about setting pieces upright before every hack.
- How to Build a Fire: Tips for Fireplaces, Campfires, and Working in the Rain
- The 9 Best Japanese Chef Knives Your Kitchen Needs
- 5 Knives Every Man Should Own
- These Might Be the Best Knives Made in America Today
- The 9 Best Kitchen Gadget Gifts for the Culinary Dad