Skip to main content

The Manual may earn a commission when you buy through links on our site.

Mixing Techniques: Four Ways to Shake, Rattle, and Roll Your Cocktails

You finally did it: your bar is stocked, your cocktail shaker is glistening, and you’ve carefully laid out a bowl of citrus fruit. Now, how the hell do you make a cocktail? The finesse of marrying ingredients will come in time, but there are a few essential mixing techniques that you can master in no time. Rashid Barrett, Seven Grand Austin’s Spirit Guide, gave us the skinny on how to navigate these methods. If you think your arms can handle it, here’s how to get shaking.

Stir

stirring a cocktail
Image used with permission by copyright holder

Tools: a mixing glass, barspoon, and julep strainer

Time: 45 to 120 seconds

Recommended Videos

“Almost all cocktails that are spirit forward, such as the Manhattan or Bobby Burns, are stirred in a mixing glass,” says Barrett. A stirred cocktail should have a velvety, smooth mouthfeel that embraces the liquor within it. When it comes to mixing techniques, it’s easy for a beginner to underestimate the complexity of stirring. While your main concern might be dilution or effective chilling, you also need to be wary of aerating the mix too much with clumsy stirring.

Barrett recommends using a

Yarai mixing glass

, but also embraces a pint glass in a pinch. Yarai references the diamond pattern cut into the glass, not a brand, but seamless versions can be easily found. Fill the glass at least ¾ up with ice, leaving room to place your

julep strainer

 as a dome (rather than a bowl) once you’re done. The jury’s out on which finger positioning works best for stirring, but your goal is to keep the spoon as connected to the glass as possible, moving in a circular motion. Moving the spoon across the glass jostles the ice and brings more air into the equation.

“Stirred cocktails are among the easiest to manage because you are able to taste your product to check for both temperature and dilution,” says Barrett, suggesting a straw for tasting purposes. “If you don’t stir long enough, you end up with a tiny cocktail and slightly higher potency. Stir too long, it’s likely you have watered the cocktail down.”

Roll

rolling a cocktail top shelf bar supply
Image used with permission by copyright holder

Tools: two shaker tins and a strainer (Hawthorne or julep)

Time: 15 to 60 seconds

A roll is most commonly used on a Bloody Mary because it’s the most effective way to chill and mix the drink without thinning the tomato juice. This is the best of the mixing techniques for carbonated drinks to avoid pressurizing the mix in a shaker or flattening the drink with a stir. You should fill one tin a little more than halfway with ice and secure the ice with a strainer of your choice. In the other tin, you’ll build your cocktail before pouring it into the other tin. Transfer the mix no more than four times, and then pour the drink into a serving glass.

An advanced version of the roll is called “throwing.” Popular in Spain, Cuba, and bar tending competitions across the world, throwing emphasizes the distance between the tins. Used for drinks featuring wine elements like sherry or vermouth, throwing is a dramatic way to aerate the mix. One tin can be as high as your head while the other is as low as your knee and you can transfer the mix a few more times than you would with a traditional roll. Be warned: this is a messy method; start out with water and work your way up.

Dry Shake/Whip

dry shaking a cocktail
Image used with permission by copyright holder

Tools: a cocktail shaker and a mixer tin (optional)

Time: 15 to 60 seconds

Dry shakes or whips are used to mix ingredients with very different textures (such as cream or eggs) and/or for drinks served on the rocks. “Traditional sours, for example, require a little more work because you’re emulsifying an egg with booze which requires most barmen/women to apply a hefty dry shake before introducing ice for a final shake,” says Barrett.

A simple enough method, dry shakes just require you to shake up a built cocktail. You then have the option of adding ice to the shaker and doing a rocks shake. You can also do a reverse dry shake if you’re interested in getting a very pronounced foam in your final drink. For this technique, you just do a rocks shake, strain your mix into a mixer tin, discard the ice, and a re-mix your drink until you achieve the desired effect.

Rocks Shake

rock shaken cocktail
Image used with permission by copyright holder

Tools: a cocktail shaker

Time: 10 to 45 seconds

This shake has the most artistic liberty of them all. The size of your ice, how long you shake your mix, and how intensely you shake will all have an effect on your drink. No one really wants an over-diluted drink, but you need to weigh the temperature of the drink against the taste.

“It’s equally as important to listen to the ice in the shaker while you’re shaking,” says Bennett after underscoring the importance of adding your ice last. “If you can hear the ice exploding and disintegrating into shards from your herculean muscles, more than likely you’ve over-diluted your beverage.”

J. Fergus
Former Digital Trends Contributor
J. loves writing about the vices of life — decadent food, strong drinks, potent cannabis, and increasingly invasive…
Kentucky Owl’s new Batch #13 is the final masterpiece from a bourbon legend
Kentucky Owl

Popular whiskey brand Kentucky Owl recently announced the launch of its newest bourbon, Batch #13. It was blended and crafted by former Master Blender John Rhea. What makes the whiskey more unique is that it was the last bourbon blend created by the Kentucky Bourbon Hall of Fame member before his retirement.
Kentucky Owl Batch #13

Batch #13 consists of a blend of five different bourbons. There’s a mix of younger and wheated whiskeys and more mature and higher rye whiskeys. The blend is roughly between eight and nine years old.

Read more
This underrated Dunkin’ coffee is smooth, strong, and totally worth the hunt
Don't overlook this coffee staple order
Dunkin nitro cold brew

Nitro cold brew is one of my go-to, anytime coffee orders, and it never disappoints, no matter where you order it. Even though nitro cold brew has grown in popularity, I still find it a "harder to find" coffee shop order when I'm on the go. I crave something about this drink's velvety smoothness—something you don't get from a regular cold brew order.

But why isn't everyone ordering the Dunkin' Nitro cold brew? Maybe Dunkin' just missed the mark on marketing this exceptional drink, but everyone I've talked to seems to have no idea that Dunkin' even has nitro cold brew. Or maybe it's just that this drink is not available at every Dunkin' location. Everyone seems to associate nitro cold brew with Starbucks, yet this drink is available beyond just Starbucks locations. Here's why I'll keep ordering Dunkin's nitro cold brew (and telling everyone I know about this order).
Where to find the Dunkin' nitro cold brew

Read more
When it comes to Champagne, what does the word “Brut” actually mean?
Get to know your bubbly
Champagne flutes

There’s just something about champagne that makes my heart flutter. Maybe it’s the sparkle, maybe it’s that famous cork pop that signals the start of a glamorous time, or maybe it’s the way it makes any cocktail feel special. I love champagne in all its forms, whether it’s bone-dry and bracing or sweet and indulgent. But not all bubbly is created equal, and if you’ve ever been confused by the difference between “brut” and “demi-sec,” you’re not alone. Let’s break down the different types of champagne so you can sip exactly what you love.
Understanding Champagne sweetness levels isn’t just wine snob trivia — it’s the key to choosing a bottle you’ll actually enjoy. Whether you’re a brut loyalist or prefer your Champagne to be softer and sweeter, knowing the differences between brut, extra dry, sec, demi-sec, and doux puts you one step closer to popping the perfect bottle. Let’s break it down, starting with the term you’re most likely to see: Brut.

What is Brut Champagne?

Read more