The Manual may earn a commission when you buy through links on our site.

How to Shave With a Straight Razor

Now that we’re in the sweltering days of summer, it’s probably high time to cut down our beards and facial care. So why not turn to a straight razor? There’s something about an open razor, mixed with a dash of nostalgia, that adds to the allure of what is possibly the closest shave you’ll ever achieve. There’s a reason many professional barbers wield the straight razor as their weapon of choice. 

“We don’t often recommend men shave with a straight razor as the learning curve is steep and the possibilities for user error (nicks and cuts and even worse) are much greater than with using a cartridge or even a double-edge safety razor,” says Michael Gilman, founder of the Grooming Lounge. However, the advantages of a straight razor shave, Gilman notes, are many.

Related Guides:

How to Prep Your Face to Shave with a Straight Razor

straight razor shave
John Slater/Getty Images
  1. Much like any shaving procedure, you have to start with the basics: start with a clean, washed face. You can even prep after washing by applying a hot towel (just microwave a wet one for 30 seconds) and resting a few minutes while the heat and steam do its work of softening facial hair and follicles.
  2. Follow that with a pre-shave oil to lube up your whiskers and skin.
  3. Apply shaving cream in whatever manner you see fit, though we suggest using a badger hair brush to really work it in and lift the hair away from the skin to allow for a closer shave once you touch a razor to skin.
  4. Use the directions in the above section to load a new blade into your shavette.

Now you can finally begin shaving.

How to Shave With a Straight Razor

After you’ve followed all the above steps, you’re finally ready to put that blade to your face. Follow these steps and you’ll wind up with the closest shave you’ve ever experienced at home.

  1. Place the straight razor in your hand with this basic grip: index, middle, and ring finger on the top of the blade with the thumb in the center at the back and your pinky resting on the blade’s handle/tang. More importantly for whatever grip you choose, however, is dexterity and comfort. If this method doesn’t feel comfortable to you and leaves you feeling shaky, feel free to switch it up.
  2. Begin shaving by starting with the right side of your face where your sideburns meet your hairline. Hold the razor at an angle almost parallel to your skin and with your opposite hand, pull the skin away from the blade and keep taut.
  3. Shave downward with the grain using small, smooth strokes. Rinse away excess hair after every stroke.
  4. Continue in that manner for your right cheek, and then proceed down and over your jaw jawline to your neck.
  5. Be extra careful when shaving your neck – the skin in that area is extremely thin and most prone to nicks and cuts.
  6. Repeat the above steps with the left side of your face.
  7. Once both sides of your face and finished, proceed to your upper lip and, using your opposite hand to pull the skin downward and as taut as possible, shave downward from the nose with small, quick strokes.
  8. Next is the chin, so this time, pull your lower lip up as far as possible and again shave downward from the lip to your chin and down your neck.
  9. Give yourself a rinse and a wipe down and follow up with aftershave and one of the best moisturizers and you’re all set for the day.

What Is a Shavette and How Do You Load One?

While some straight razors are a true blade, just like your favorite kitchen knife, others feature an easily changeable razor blade — used in a “shavette” — for minimal maintenance.

Murdock London offers the following step-by-step directions to loading a disposable blade:

  • Lift the metal catch at the end of the razor and separate the two metal sections.
  • Set the fresh blade with the edges facing to and away from you. Hold it from underneath with both thumbs and middle fingers in the middle.
  • Bend the edges upwards until they snap clean in half.
  • Fit a half-blade over the two raised bumps on the lower metal section and then place the higher metal section on top and squeeze together.
  • Close the catch over the two metal sections. Your straight razor is now ready for use.

The Benefits of a Straight-Razor Shave

  • More precise, controlled shave compared to traditional safety razors.
  • Reduced risk of ingrown hairs, nicks, and infection.
  • Less money spent on supplies since you’re not buying expensive cartridges again and again.
  • More environmentally friendly for the same reasons its less expensive — fewer disposable items mean less pollution and resource consumption.

Best Straight Razors for 2020

Grooming Lounge Dovo Classic Straight Razor

This lovely classic style features an ebony handle, carbon steel, and it’s made in Germany. It’s perfect for your straight razor shave or for close, careful trimming around mustaches and beards.

Grooming Lounge Parker SRX Heavy Duty Straight Razor

The choice of professionals the world over, this shavette is weighted for just the right balance and, at a great opening price point, is an excellent beginner’s choice to start exploring the world of straight razor shaving. 

Editors' Recommendations