Skip to main content

5 mountain biking habits everyone on a mountain bike must learn ASAP

Ride hard, stay safe, avoid injury

Climbing up a mountain biking trail using the Smith Shift MAG sunglasses
Travis Reill / The Manual

If you have jumped into the world of mountain biking like so many over the past few years, you may find that it can be an overwhelming space. Even figuring out what type of mountain bike you need (or that there even were different types) can feel like a lot.

With the first step of actually purchasing a mountain bike behind you, there are quite a few other things you want to consider. What mountain bike helmet should you get? What should you bring on each ride?

These are essential things to focus on and figure out. Riding without a helmet is a terrible idea. Not being prepared is nearly as bad. But I often see new riders hitting the trails with lousy technique and poor form, putting them at serious risk.

I have also seen people mountain biking that I wouldn’t have considered “new” doing equally dangerous things. This almost always comes from not forming needed habits when first learning to ride a mountain bike.

Forming proper mountain bike habits is easiest when swinging your leg over a bike for the first time. If you were unaware of these five habits, don’t worry. It’s not too late. With some intentionality and discipline, you can change how you mountain bike.

"Covering your brakes" means keeping your index finger resting on your brake lever always
Travis Reill / The Manual

Covering your brakes

Perhaps one of the most important habits you can form on your mountain bike is to cover your brakes. Cover your brakes? What on earth does that mean?

If you have a modern mountain bike, your bike brakes likely consist of three parts: rotor, caliper, and levers. The rotor is the large disc attached to your wheel that spins through the caliper attached to the frame. When you squeeze the lever attached to your handlebars, the hydraulic fluid causes the caliper to pinch the rotor, slowing your mountain bike down.

Covering your brakes refers to learning how to ride with your index fingers resting, or “covering,” both brake levers at all times. Jumping, dropping, and fast descents, you will always be ready to grab the brake lever. 

Often, the fractions of a second it may take to move your finger off the bars to the levers can result in a crash. Sometimes, your finger may catch the underside of the lever, not allowing you to get a finger on your levers. Get in the habit of covering your brakes always.

The best way to do this? Ride your bike around your neighborhood, park, or any easy, flat surface with your index fingers on your brake levers. Next, take it to easy trails, practicing easy climbs and descents. You’ll begin to feel the normalcy of mountain biking with your index fingers off the bars.

Keep your pedals level when riding over obstacles like rocks and roots
Travis Reill / The Manual

Level pedals

Our default position while coasting on our mountain bikes is to have one pedal up and one down. This is usually how we can relax our leg muscles the most. It is also the way we hit rocks or roots with our pedals.

You want to keep your pedals level whenever you are cornering or going over any technical obstacles on your bike. Think of a clock. You want your pedals at 3 and 9, not 12 and 6. 

This is especially true as you ride into corners. As your mountain bike leans into the corner, pedals that aren’t level will have one very close to the ground. Add in a rock or root sticking up, and you have a recipe for a crash.

Like covering your brakes, practice is the best way to form this habit. Find a rocky or rooty section and practice mountain biking through with level pedals. Repeat this process for corners, drops, jumps, bumps—nearly everything.

Riding a mountain bike trail using the Insta360 X3
Travis Reill / The Manual

Looking down the trail

Stop looking at the front tire when you ride your mountain bike. We tend to stare directly down at the space of the trail in front of our tire. This gives us little to no ability to see and anticipate what is coming up.

Try to keep your eyes looking as far down the trail as possible, within reason. Perhaps you’re mountain biking trails that are flat and straightforward. You don’t need to look to see the earth’s curvature, but keep your gaze down the trail at least 10 yards ahead.

This will take some intentionality, and you will find that it is very easy to focus your gaze down. One trick I recommend is practicing looking for immediate and secondary lines. Immediate lines are when you look at where you are at that precise moment (looking down), and secondary lines are when you look down the trail, seeing what comes next. 

Mountain biking up a trail
Travis Reill / The Manual

Standing during obstacles

You can get bucked off your mountain bike. This can happen in a few different ways, such as coming off of a jump wrong. If you don’t have it timed right, the lip of the jump will cause your rear wheel to pop up, causing you to start going over the handlebars while in the air. That is getting bucked.

This can happen on the ground, too. If your rear end is firmly planted on a raised seat while going over chunky, rocky, and rooty terrain, you may feel the back end of your bike bucking you off. You may not front-flip over the bars, but it can easily cause you to be out of control and crash. 

Instead, get up out of the saddle, standing on level pedals when going over rough terrain, obstacles, or through turns. Keep your arms and knees bent, ready to absorb impacts from the rough trail. The suspension on your bike helps a lot, but your arms and legs are the most significant suspension you have.

As you can imagine, this skill goes along with keeping your pedals level.

Going around a corner on a mountain bike with the Smith Forefront 2 helmet and Smith Wildcat sunglasses
Travis Reill / The Manual

Proper braking

One of your first priorities should be learning to cover your mountain bike’s brakes. When, where, and how much to brake all rely on your immediate response to the trail.

What brakes you are going to apply is also important. We all remember the first time we got on a bike without kick brakes, grabbed a handful of front brake, and went over the bars. The rear brake became our friend because we didn’t want to flip over again, and, let’s face it, skids are cool.

Skids aren’t so cool, however, on your local mountain biking trails. In fact, you will likely be in some trouble with the trail builders because of the damage you are causing. Instead, apply even amounts of front and rear brake when slowing down. Practice it first at lower speeds and work your way up. If your weight isn’t over the front, you’ll be fine.

Equal front and rear brake pressure should be applied before, not during, your turn. Learning to slow down before your turn not only helps you carry appropriate speed through the turn but is also the safer way to execute a turn.

Mountain biking is a long learning process. You’ll never be done gaining and achieving new skills. You will then continue to work on perfecting those skills. Make sure you are working on those skills from a solid mountain biking foundation.

Editors' Recommendations

Travis Reill
Contributor
Hi! I'm Travis, a teacher turned stay-at-home dad turned freelance writer. Mountain biking is my passion. Fortunately, I've…
You know you’re a mountain biker if…
How you can spot a mountain biker
Mountain biking down a trail in Evo Bike Pants

If you have been mountain biking for a long time, the content of this article won’t come as much of a surprise to you. You likely already know the quirky things that make a mountain biker, well, a mountain biker.

If you are not a mountain biker, or perhaps you are fresh to the sport, some of these quirks and idiosyncrasies may come as a bit of a surprise for you. For some, it may shed some light on why a loved one is so weird. For others, it will be like looking into a crystal ball, showing an inevitable future you can’t run away from.

Read more
Hop on the best mountain bikes for under $1,000 – Trek, Specialized, and more
Mountain biking can be an expensive hobby, but these affordable trail-ready rides prove that it doesn't have to be
Person bicycling on a single track

As with any adventure sport, getting into mountain biking can be an exhilarating journey, but a pricey one at the same time. Whether you're a beginner mountain biker or an experienced rider, it's important to invest in a good bike because it will ultimately hold up longer and handle better on the trails.

But just because it's important to buy a good mountain bike doesn't mean it has to empty your wallet. These 10 models — all priced under a grand — are among the most affordable bikes worth springing for if you're looking to hit the trails. Whether you're a newb just starting out or a seasoned trail rider, these are the best mountain bikes under $1,000.

Read more
3 mountain bike trends we hope to see the industry adopt
Dear mountain bike industry: please make these changes
My Specialized Stumpjumper with Forge + Bond 30AM carbon wheels

Old habits can certainly die hard, and the mountain bike industry is no expectation. For almost two decades, we have seen significant changes proposed in the mountain bike industry face opposition, only to be accepted as the new standard a handful of years later.

And while this opposition to change in mountain biking does have something to do with new technologies not being better than previous ones, opposition to change itself is a factor. 

Read more